Don't let a little tear in your waders weigh you down with dampness. Aquaseal FD is a clear, waterproof adhesive and sealant. It is specially formulated for the flexibility, adhesion and abrasion protection you need to keep you going. To fix a tear in your waders is simple, just follow the steps below.

Field Repair:

For instant field repairs, use the Aquaseal FD Repair Kit.

 

Step 1:

Apply a patch over tear on outside of wader. Apply Aquaseal FD to tear on inside of wader and 1/4 inch beyond the tear

 

Step 2:

Cover with another patch. Waders can be used immediately. 

Reparing your waders at home?

Just clean the area surrounding the tear with isopropyl alcohol and then apply Aquaseal FD. Be sure it covers the tear by at least 1/2 inch. Allow the adhesive to cure for 12-24 hours on a flat surface. Waders a little smelly too? While you're at it, deodorize your waders with Revivex Odor Eliminator. 

Related Articles

Recommended Products

Aquaseal FD Repair Kit

Aquaseal FD Repair Kit

Kits $7.50
Revivex Odor Eliminator

Revivex Odor Eliminator

Cleaners $8.95
Aquaseal FD Repair Adhesive

Aquaseal FD Repair Adhesive

Adhesives $7.75